Home > Products > Dryer Equipment > Products
Introduction
Product Description:
Dryer machine is a kind of dryer with a rotating cylinde which is a little bit incline. it is simply structure, polished manufacture, high capacity, low cinsumption, conveninent transportation and so on.
Dryer machine is a kind of dryer with a rotating cylinde which is a little bit incline. it is simply structure, polished manufacture, high capacity, low cinsumption, conveninent transportation and so on.
Features:
1. strong overload resistance capacity, large capacity, low fuel consumption, low drying cost;
2. the dryer adopts downstream drying method, hot air enters into the dryer with wet material, which obtains high evaporation intensity by high temperature air; temperature in dryer outlet is low, with high thermal efficiency;
3. the dryer can change operating parameters according to different material properties, with high quality and sufficient heat exchange;
4. the dryer adopts new feeding and discharging devices, putting an end to feeding jam, discontinuity, non-uniform phenomenons of vertical dryer, reducing the load of dust-removing system;
5. the dryer achieves "zero horizontal thrust", greatly reducing the wear of gear wheel;
6. the dryer adopts self-aligning roller device, wheel and roller ring contact each other in a line, thereby greatly reducing wear and power loss;
7.product moisture can be controlled according to user requirements.
2. the dryer adopts downstream drying method, hot air enters into the dryer with wet material, which obtains high evaporation intensity by high temperature air; temperature in dryer outlet is low, with high thermal efficiency;
3. the dryer can change operating parameters according to different material properties, with high quality and sufficient heat exchange;
4. the dryer adopts new feeding and discharging devices, putting an end to feeding jam, discontinuity, non-uniform phenomenons of vertical dryer, reducing the load of dust-removing system;
5. the dryer achieves "zero horizontal thrust", greatly reducing the wear of gear wheel;
6. the dryer adopts self-aligning roller device, wheel and roller ring contact each other in a line, thereby greatly reducing wear and power loss;
7.product moisture can be controlled according to user requirements.
Parameter
|
Diameter* Length of shell |
Inside diameter of outer shell (mm) |
Inside diameter of inner shell (mm) |
Shell length (m) |
Volume (m3) |
Shell obliquity (￮) |
Lifter form |
Highest inlet air temperature (℃) |
Dimensions (m) |
|
ф1.5×15m ф1.5×17m ф1.5×19m |
1500 | 500 |
15 17 19 |
20.27 22.97 25.68 |
3-5 | Lifting form | 850 |
16.2×2.7×2.7 18.2×2.7×2.7 20.2×2.9×2.9 |
|
ф1.8×21m ф1.8×23m ф1.8×25m |
1800 | 650 |
21 23 25 |
35.91 39.33 42.75 |
3-5 | Lifting form | 850 |
22.5×2.7×2.7 24.5×2.9×2.9 26.5×2.9×2.9 |
|
ф2.2×21m ф2.2×23m ф2.2×25m |
2200 | 900 |
21 23 25 |
58.10 63.61 69.15 |
3-5 | Lifting form | 850 |
Contact Us
- Electrical Industry Zone Of Zhengzhou, Henan, China (Mainland)
- 0086-371-67996061
- blmachinery@bljq.net
- www.bailingmachinery.com/
If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, a representative will contact you within one business day. We guarantee that your information will not be divulged to the third party.
